Metal Roofing Installation and Repair in Beaumont
We put new metal roofs on over a sound deck and fix the ones already up, at the seams, the fasteners and the flashing.
Free, no-obligation estimates. We answer the phone or call back the same working day.
Metal Roofing in Beaumont
Metal roofing on residential and commercial buildings in Beaumont ranges from standing seam panels to stone-coated steel and aluminum shakes.
We install new metal roofs and repair the ones already on houses, shops and other commercial buildings around town. Every job starts with someone on the roof looking at the deck, the slope and the details where water gets in, and the estimate for it is free.
We show up when we say we will, quote the whole job before we start and clean up when the work is done.
Metal Roof Styles
Metal roofing comes as panels, stone-coated steel and aluminum shakes, from makers such as ATAS, along with the trim that finishes every edge.
-
Standing seam panels
Long, smooth pans run from ridge to eave, joined by raised seams that stand above the water line. It is the clean, straight look most people picture as a metal roof.
-
Stone-coated steel
Steel pressed into tile or shake profiles and finished with a granular coat, so it reads like a traditional roof from the street. It sits among the premium styles.
-
Aluminum shakes
Light aluminum pieces shaped like wood shakes, laid in overlapping courses. Country Manor shakes are a premium example.
-
Metal trim and flashing
The bent pieces at the edges and openings: the "drip edge" at the eaves, valleys, chimney shrouds and door pans. Every style above depends on them to stay dry.
How a Metal Roof Goes On
Hidden deck damage is repaired before anything else, then the underlayment, the panels and the flashing go on to the manufacturer's standards.
That order matters. Ignoring the maker's material and installation recommendations leads to early roof failure, and new metal laid over a soft deck carries the problem along with it.
-
Check the deck
The "roof deck", the plywood or boards under the roofing, is checked, and any rotted or soft section is cut out and replaced.
-
Lay underlayment
The "underlayment", the waterproof layer under the metal, goes down over the sound deck to the maker's specification.
-
Set the panels
Panels or shakes go on in the pattern and with the fastening the manufacturer calls for, edge to edge across each slope.
-
Flash and trim
"Flashing" closes every chimney, wall and valley, the edge metal goes on at the eaves and rakes, and the yard is cleaned up.
Want the whole roof quoted before you choose a style?
No charge to come look.
How Metal Roofing Is Priced
Metal costs more than shingle up front but lasts longer, so its cost per year evens out.
What moves a metal price is the size of the roof, its pitch and number of stories, how complicated the roofline is, the style you pick and any damage found underneath. A steep, cut-up roof in stone-coated steel sits at the top of the ranges beside this; a simple low slope in panels sits lower.
Roofers price by the "square", a patch of roof 100 square feet in size. We measure yours and quote the whole job before we start, with no surprise charges after.
Typical metal roofing prices here
- A whole metal roof, by size and system
- $6,500 to $40,700
- A basic standing seam roof on a modest house
- $9,700 to $15,300
- Standing seam per square, no tear-off
- $712.97 to $933.08
- Metal roofing installed, per sq ft
- $6 to $12
Ranges researched for the area, not a quote from us. Your price comes from the estimate.
Metal Roof Repair and Coating
Metal roofs are repaired at their flashing and fasteners, the places where the roof is pierced or meets a wall, a chimney or a valley.
Flashing is the most common leak point on any roof. Worn or loose pieces are replaced with custom sheet-metal parts such as drip edges, chimney shrouds, valleys and door pans, bent to fit the roof they go on.
When the panels themselves are aging, a fluid-applied coating can reseal the whole surface. Cool roof coatings are registered under the Cool Roof Rating Council rating program.
Neighbors on the work
These are our Google reviews, as our customers wrote them.
-
Chilo was super quick to respond and come by for a quote. I only needed minor repairs, but the work was done quickly (within the day) and for a fair price.
Google review -
I am so happy I called IH roofing. My new roof looks great. I called 5 roofing companies and the bid from IH roofing was very competitive. $1000's less than the big companies. I told them my need was dire and they put me right into their calendar. They worked from 8am to dark and had my roof completed in under two days. The crew was courteous and they left my yard cleaner than they found it. I recommend I H roofing without any hesitation.
Google review -
Professional and did an outstanding job on replacing shingles and bad areas that was found on my roof. I highly recommend IH Roofing.
Google review
Thinking about a metal roof?
Call and we come out, look at the deck and the details and price the style you want.
We quote the whole job before we start, with no surprise charges after.